For a traditional U.S. Marine Corps display, look for the scarlet service design with the Eagle, Globe, and Anchor. Check how and where you’ll fly it before ordering: a porch pole, an outdoor halyard, an indoor presentation staff, and a large indoor wall may each need a different finish.
The flag and the November 10 birthday
The Continental Congress resolved to raise two battalions of Marines on November 10, 1775. In 1921, Commandant John A. Lejeune issued an order commemorating that date. The Marine Corps’ account of the birthday tradition explains why November 10 is observed today. The modern service flag represents the Corps; it should not be presented as a reproduction of a flag carried by the Continental Marines in 1775.
Scarlet service design or a black EGA flag?
Choose the scarlet design when the purpose is a recognizable branch display or a ceremony that calls for the service colors. A black Eagle, Globe, and Anchor flag is a commemorative or decorative choice. Our black 3D EGA flag, for example, is a made-to-order artistic interpretation. The U.S. Merchant Marine flag represents a different service and is a separate design.
Match the flag to your pole
- Outdoor halyard: Select the heading specified for your pole and clips. For a grommeted flag, measure the clip spacing against the hoist edge.
- Porch staff: Check whether it takes a pole sleeve or grommets. Measure the available swing so the flag won’t rub against siding, railings, or gutters.
- Indoor or ceremonial staff: Confirm the venue’s requirements for sleeve, fringe, and any mounting accessories before ordering.
A 3 × 5 ft flag is a useful size to compare for a home display when the pole maker allows it. For an exposed pole or a two-flag arrangement, follow the manufacturer’s size and load guidance. There is no universal flag size or wind rating that applies to every installation.
Large Marine Corps flags for indoor walls
For a warehouse, school gym, aircraft hangar, or lobby, choose a flag finished to hang against a wall. Our large wall-mounted Marine Corps flag is custom printed in the USA in sizes from 6 × 10 ft to 20 × 38 ft. Measure the clear wall area and choose the header style to match your attachment points. The top header suits a display hung along the upper edge; the fully framed header adds fabric around all four edges for perimeter attachment.
Choose fabric and finish for the location
Our Made in USA nylon Marine Corps flag is a practical choice for a pole display when you want a flag that opens in lighter breezes. Compare the heading, fly stitching, and corner reinforcement on the actual listing. If both faces will be viewed up close, check how the reverse is finished; a standard flag may show the design in reverse, while a separately constructed double-sided version can read correctly from both sides. Confirm the material, country of manufacture, and lead time for the variant you order.
Set up the display before the ceremony
Lay out the flags and hardware before the event. Give the U.S. flag the position of honor; for an official or joint-service ceremony, use the organizer’s protocol for service-flag order and placement. Before outdoor use, check the snaps and halyard for wear. Bring flags in before severe weather when it is safe, and let them dry before storage.
Shop U.S. Marine Corps flags and choose the design, size, and finish that match your display.
