Showing 1-6 of 6 results
Sort by
- Sort by Featured
- Sort by Best Selling
- Sort by Alphabetically, A-Z
- Sort by Alphabetically, Z-A
- Sort by Price, low to high
- Sort by Price, high to low
- Sort by Date, new to old
- Sort by Date, old to new
Flag Pole Rope & Halyard - Solid Braided and Wire Center
Flag Pole Rope & HalyardThe halyard is the rope that raises and lowers your flag — and it's the part that wears out first. UV, wind and daily use fray a rope long before the pole shows its age. Replacing it is the cheapest maintenance you'll ever do on a flagpole.
We cut flag pole rope to length, priced per foot with a 40 ft minimum, in four diameters — 3/16", 1/4", 5/16" and 3/8" — and four colors: white, silver, bronze and black. Prefer a ready-to-go length? Our pre-bagged halyard ships in fixed 30–100 ft lengths.
How much rope do I need? A good rule: double the height of your flagpole. A 25 ft pole takes roughly 50 ft of halyard. Order a little long — you can always trim.
Which diameter? That's set by your flagpole truck, not by preference. As a guide: 1/4" fits ST and OT series and most internal halyard trucks; 5/16" fits the RTS and RTC revolving series; 3/8" fits heavy-duty HDT trucks. Check your truck model before ordering, or call us at 800-454-6998 and we'll match it for you.
Choose your halyard:
Solid braided polyester — the standard replacement flag pole rope. Low stretch, UV and abrasion resistant, from $0.48/ft. Right for most residential and commercial poles.
Wire center halyard — polyester over a steel cable core that resists cutting. The anti-theft choice for schools, parks, municipal buildings and anywhere a flag is left unattended.
Technora halyard — high-performance fiber in a polyester jacket. Maximum strength with minimal stretch for tall commercial poles and high-wind sites.
Pre-bagged halyard — measured, cut and bagged in 30 to 100 ft lengths. No calculation needed.
Zipklip flag fasteners — nylon clips with stainless spring clips and a locking set screw, to attach the flag to the rope.
Rope alone won't finish the job — you'll also want pulleys and trucks, cleats to tie off, and snaps and coversto hang the flag. All made in USA and shipped fast.
We cut flag pole rope to length, priced per foot with a 40 ft minimum, in four diameters — 3/16", 1/4", 5/16" and 3/8" — and four colors: white, silver, bronze and black. Prefer a ready-to-go length? Our pre-bagged halyard ships in fixed 30–100 ft lengths.
How much rope do I need? A good rule: double the height of your flagpole. A 25 ft pole takes roughly 50 ft of halyard. Order a little long — you can always trim.
Which diameter? That's set by your flagpole truck, not by preference. As a guide: 1/4" fits ST and OT series and most internal halyard trucks; 5/16" fits the RTS and RTC revolving series; 3/8" fits heavy-duty HDT trucks. Check your truck model before ordering, or call us at 800-454-6998 and we'll match it for you.
Choose your halyard:
Solid braided polyester — the standard replacement flag pole rope. Low stretch, UV and abrasion resistant, from $0.48/ft. Right for most residential and commercial poles.
Wire center halyard — polyester over a steel cable core that resists cutting. The anti-theft choice for schools, parks, municipal buildings and anywhere a flag is left unattended.
Technora halyard — high-performance fiber in a polyester jacket. Maximum strength with minimal stretch for tall commercial poles and high-wind sites.
Pre-bagged halyard — measured, cut and bagged in 30 to 100 ft lengths. No calculation needed.
Zipklip flag fasteners — nylon clips with stainless spring clips and a locking set screw, to attach the flag to the rope.
Rope alone won't finish the job — you'll also want pulleys and trucks, cleats to tie off, and snaps and coversto hang the flag. All made in USA and shipped fast.
Pre-Bagged Polyester Halyard
$27.20
Zipklip Flag Fasteners
$16.70
